from the Brain Dump department...
Control.com Post Archive
Information resources, documentation. topic
Posted by Ivan Turk on 30 October, 2000 - 5:01 pm
Free Comtext
Student looking for free version of Siemens Comtext
Open-source control projects, related links.  topic
Posted by Chris on 30 October, 2000 - 4:38 pm
BACnet driver
BACnet is a protocol used for Building Automation which might be a useful addition to the Linux PLC.
Sensor technologies. topic
Posted by Don on 30 October, 2000 - 3:18 pm
Flow Meter
Looking for a flow meter to be located in a remote area of the mill. It will be installed in a 10 inch line and measuring water flow but there is no power available. Needs to display GPMs and possibly totalize flow. Thanks...
Open-source control projects, related links.  topic
Posted by Harald Albrecht on 30 October, 2000 - 12:32 pm
... C++ headers, was Where we are (long)
> I think what you have to do is put an
> extern "C" { ... };
> around the C declarations. That's because
internally C++ uses some hairy
> Hungarian notation, so you have to tell it
that it's not there.
....
Information resources, documentation. topic
Posted by Stephen Wright on 30 October, 2000 - 10:18 am
Relays in presses
Are there standards for press control design and construction? Can anyone suggest a source for
relays that can be used in a press the strokes millions of times per year?
Continuous process industries, DCS questions. topic
Posted by jf on 30 October, 2000 - 9:42 am
Compensating drum level with drum pressure
what are the details to compensating drum level with drum pressure, i need formulas, curves, etc or where to find them. ...
Open-source control projects, related links.  topic
Posted by Mario de Sousa on 30 October, 2000 - 8:17 am
What now? (flame bait), was Where we are
Hugh Jack wrote:
> If anybody wants to use my code, feel free.

Thanks Hugh.

> If you are trying to patch in the SMM,
> it is best to do it through the 'io.cpp' file.

Actually I was thinking of taking out all the io stuff. ...
PLCs and related questions. topic
Posted by Mark on 30 October, 2000 - 7:22 am
Need to learn more about PROFIBUS.
In order for me to understand the way the integration and structure of PROFIBUS is achieved.
Open-source control projects, related links.  topic
Posted by Mario de Sousa on 30 October, 2000 - 5:53 am
New simplified syntax for configuring module synchronisation.
I have just committed some changes to the synch library that allow configuring module synchronisation using a simplified configuration
syntax.
Open-source control projects, related links.  topic
Posted by Philip Costigan on 29 October, 2000 - 7:08 pm
io linuxconf changes
I have just managed to alter the way io/modbus/linuxplc.conf is configured so that each io base can be called by a node name.
Open-source control projects, related links.  topic
Posted by Curt Wuollet on 29 October, 2000 - 4:04 pm
Where we are (long)
I have looked at all the responses both public and private to the questions I posed and the general state of things. As is usual with
a request of this type, I have been left with more questions than answers: I will start with my statements and then, sigh, some more questions.
Human-Machine Interface and SCADA. topic
Posted by jignesh patel on 29 October, 2000 - 11:24 am
Tags required for WinCC
Tags required for WinCC
Human-Machine Interface and SCADA. topic
Posted by jignesh patel on 29 October, 2000 - 10:53 am
Challenge for WinCC Users
Challenge for WinCC Users
Application Questions and Problems topic
Posted by Dennis McCaustland on 28 October, 2000 - 4:01 pm
Adding remote floppy and CD drive for a rack mount PC
Need to mount either in a separate box or an operator panel a floppy drive and CD drive as rack mount computer is in an enclosure 5 to 10 feet away. Must work with NT 4.0
PLCs and related questions. topic
Posted by smokey on 28 October, 2000 - 11:51 am
Series one cable pinout
Need cable pinouts for a GE series one to GE "LCD Programmer" .
Communications systems and equipment. topic
Posted by Rajesh Pandita on 28 October, 2000 - 12:47 am
OPC Server Connectivity With Teleperm ME
OPC Server communications
Communications systems and equipment. topic
Posted by Patrick So on 27 October, 2000 - 9:44 pm
DH+ to Profibus-DP connection
A gateway which can connect Profibus-DP to DH+ network.
Software, including programming, OS issues, etc. topic
Posted by Len Klochek on 27 October, 2000 - 11:31 am
TIF to PDF Active X
Does anyone know of a source for an Active x control that converts TIF files to PDF files.
Engineering and workplace issues. topic
Posted by Josh Thames on 27 October, 2000 - 11:09 am
RF/MF Drive Interference
Problems with a Reliance FlexPac 3000 digital DC faulting at irregular intervals. Fault codes point to RF/MF interference.
Application Questions and Problems topic
Posted by J-F Portala on 27 October, 2000 - 11:05 am
Maths interpolation
I am working in the filed of
industrial image processing, and I have the following problem. On a camera, the lense creates image distorsion on the edge of the camera
field. I would like to compensate it mathematically. ...
Information resources, documentation. topic
Posted by EC-Josue Portal Fraga on 27 October, 2000 - 8:49 am
standard for system specification document
I am searching for an standard that guides the elaboration, and establishes the contents and the format, of systems specifications and requirements documents.
Software, including programming, OS issues, etc. topic
Posted by Kevin Ma on 27 October, 2000 - 8:45 am
Soft keyboard
Soft keyboard
Communications systems and equipment. topic
Posted by Andrey, Bob on 26 October, 2000 - 4:17 pm
routers and bridges for TCP/IP networking
Trying to find out the pro's and cons of routers and bridges that are used in TCP/IP networking.
Where can I get some good information comparing the two.
Engineering and workplace issues. topic
Posted by JORGE BASTANTE on 26 October, 2000 - 3:55 pm
Pilot Plants
I need to know the location of pilot plants for training or research purposes (universities, institutes). My interest is focused in those
fully automated and if possible with computer supervision and control systems. ...
Communications systems and equipment. topic
Posted by Beatriz Morte on 26 October, 2000 - 2:19 pm
Speed in MB+
The Network MB+ support 1200m without repeters. We have found problems with the net speed. The different topics are: numbers of members in the net, meters of net, kind of programming...
Continuous process industries, DCS questions. topic
Posted by O'Connor, Denis on 26 October, 2000 - 9:33 am
Enflex Building Automation Experience anyone????
We are currently evaluating some products from a company by the name of Enflex. http://www.enflex.net I would be interested in any feedback from people that have used their products. We're looking at the MG200 and the IO-12.
Continuous process industries, DCS questions. topic
Posted by Vereecken Johan on 26 October, 2000 - 9:14 am
ORP and ozonization
When treating a complex pharmaceutical wastewater with ozone (and with/without UV) the online measured ORP gets very negative (from +90mV to
-700mV ! One would expect an oxidation. ...
PLCs and related questions. topic
Posted by Kitiphot Sitilertpisan on 26 October, 2000 - 8:27 am
Monitor for Teleperm M AS215
Find monitor for Teleperm M AS215
Continuous process industries, DCS questions. topic
Posted by Praveen on 26 October, 2000 - 8:16 am
Newbie to WinCC and OPC
I am trying my hands on WinCC and OPC recently. Could anybody please where can I find the sample projects and tutorials for WinCC especially, and also for OPC. I am working on the communication between these two. ...
Open-source control projects, related links.  topic
Posted by Campbell, David (Ex AS17) on 26 October, 2000 - 4:47 am
Stupid question about shared memory...
Hopefully there is an easy answer to the following question: Why does Puffin use shared memory rather than memory mapped files?
Communications systems and equipment. topic
Posted by Harry Friemann on 26 October, 2000 - 4:46 am
RS232 to Ethernet (programmable)
I am looking for a device that can receive messages from a RS232 port (form a CI card of a PHILIPS pc20 PLC), and send this message through Ethernet using TCP/IP to an address acquired from within the message.
Sensor technologies. topic
Posted by Luigi on 26 October, 2000 - 3:48 am
Weighing indicator (UMC600) contact
Need to find the manufacturer of a weighing indicator whose name is UMC600 and is supposed to be made by an Eaton subsidiary
Software, including programming, OS issues, etc. topic
Posted by Mark Johnson on 26 October, 2000 - 3:22 am
Best OS for Real Time Control
I want to rewrite some old legacy DOS programs for real-time control under a windows environment using VB6.0. Which is the best OS option.
PLCs and related questions. topic
Posted by Amora Fibrianto on 26 October, 2000 - 2:56 am
SLC500 Redundant
Using AB SLC500 BSN
Motion control, servos, steppers, etc. topic
Posted by Mark Johnson on 26 October, 2000 - 2:55 am
Motion Control Novice Requires Help with an unstable system
I have a servo controlled system which is behaving erratically. I would really appreciate any advice from system experts.
Open-source control projects, related links.  topic
Posted by Campbell, David (Ex AS17) on 25 October, 2000 - 7:10 pm
Updated Puffin FAQ
Apologies in advance to anyone I have miss-quoted in updating the FAQ, also anyone who has problems with their web browser viewing the document (at the start there is a triple nested table as this was the easiest way out at the
time).
Application Questions and Problems topic
Posted by Michael on 25 October, 2000 - 5:28 pm
Transferring output from digital camera to PLC
Looking for digital color camera with PROFIBUS output to transfer 30-50 RGB bitmaps/sec. to SIEMENS S7-400PLC
Software, including programming, OS issues, etc. topic
Posted by Willy Smith on 25 October, 2000 - 4:55 pm
New Software Package, MS-Linux
Hey, has everybody seen the release of Linux promised by Microsoft next year?
Information resources, documentation. topic
Posted by Ken Crater on 25 October, 2000 - 4:49 pm
Open Control Lab
As promised earlier in the year, our Open Control Lab is preparing to launch.
Local and wide area networking in factory automation. topic
Posted by alejandro macias on 25 October, 2000 - 11:57 am
surge protectors for Remote Input Output network
Iīm looking for surge protectors for Remote Input Output network.
Application Questions and Problems topic
Posted by Chris Ryan on 25 October, 2000 - 11:31 am
Power
I'm looking for info on solar cells to power remote equipment (I.e. cameras, wireless hubs etc). Any thoughts.
Continuous process industries, DCS questions. topic
Posted by ECG, Freddy del Toro Leyva on 25 October, 2000 - 11:02 am
Better supervision software and control ??
Can somebody tell me which the better supervision software and control are (SCADAs) that exist in the market at the moment???
PLCs and related questions. topic
Posted by Lynn Linse on 25 October, 2000 - 10:59 am
Full-Duplex Modbus/RTU
We have a large customer using Modicon PLC (Modbus/RTU slaves) who wants to use the XMIT block to send Master-like writes when an alarm condition exists (ie: to implement Report-By-Exception). The Modicon PLC handles this
situation and interleaves the new "Master Request" between the "Slave Response". We need to do the same. ...
Open-source control projects, related links.  topic
Posted by Jiri Baum on 24 October, 2000 - 11:24 pm
the plc_set() function
Here's the first installment of ``better living through documentation''.
Open-source control projects, related links.  topic
Posted by Campbell, David (Ex AS17) on 24 October, 2000 - 6:34 pm
How people can help! (was: Where are we?)
To all would be coders,
There appears to be a number of people on this list who have the following skills: a) Average programming skills, mostly at device level; b) Interest in PLC devices; c) Specific areas of interest in industrial control and automation ...
PLCs and related questions. topic
Posted by Nguyen, Phandai on 24 October, 2000 - 2:09 pm
Small, microPLC comparisions
Just wonder if anyone has came across any articles or information about PLC comparisions.
Information resources, documentation. topic
Posted by Mehmet_Ilker_YILMAZ on 24 October, 2000 - 2:00 pm
Rs232-Rs485 Converter
Can anyone send me information about these converters. Can I build my own converter?
Information resources, documentation. topic
Posted by Jim Pinto on 24 October, 2000 - 12:59 pm
Growth in Industrial Automation
It is interesting that *nobody* has responded, with a list of their favorite companies that are growing fast! Or, that at least a couple of Automation companies would have volunteered (boasted) about their growth and success. ...
Engineering and workplace issues. topic
Posted by Martin Cutajar on 24 October, 2000 - 12:56 pm
earthing of control transformer
Would appreciate your input regarding earthing of control transformer secondary 'neutral' (say 110 Vac, 48 Vac and 24 Vac voltages), and safety
advantages of using isolated control supplies.
what about 24 Vdc control supplies?
PLCs and related questions. topic
Posted by B.M. Huk on 24 October, 2000 - 12:31 pm
RSView32 demonstrator with SLC5/05
We are trying to use RSView32 demonstrator with SLC5/05 connected to a ethernet network. While RS Who Active shows which PLC's are available, when you select one,RSview comes back with the message "Invalid Selection. Cause: Device Type not supported"
Any clues?
Continuous process industries, DCS questions. topic
Posted by Tang Chin Teng on 24 October, 2000 - 12:21 pm
pH control
I'm doing my thesis for B Eng. I have read books by Shinskey but still cannot get the idea.. hope that anyone out there can show me some light...
Communications systems and equipment. topic
Posted by Derek Chan on 24 October, 2000 - 8:56 am
Modicon Programmable BM85
Has anybody out there done any work with writing codes for the programmable version of the BM85 from Modicon.
Engineering and workplace issues. topic
Posted by NORGREN on 24 October, 2000 - 4:22 am
Pneusimpro version 1.0
I need some help on these software to work on my pc. As I try loading on to my pc and it won't run, even with special key attach.
Information resources, documentation. topic
Posted by GSP on 24 October, 2000 - 3:29 am
Basics of industrial automation?
Introduction to the basics of industrial automation?
Application Questions and Problems topic
Posted by Wee KiatSiong on 24 October, 2000 - 1:48 am
Frequency to voltage converter
I'm constructing a frequency to voltage converter for my final year thesis project in B Sc.(physics).
PLCs and related questions. topic
Posted by Balaji Naidu on 23 October, 2000 - 3:23 pm
Communicating two Mitsubishi PLCs with RS485BD
We are using Mitsubushi Series FX2n PLCs with RS485BD. Can we communicate two PLCs with the above configuration (RS485 ie OPEN Protocol). Or it require to write some separate Driver Software.
Sensor technologies. topic
Posted by John Kelley on 23 October, 2000 - 1:47 pm
Looking for deep field, narrow sense width prox.
I'm looking for a prox. sensor to verify that a metal spring has been placed inside a plastic guide hole. The sensor must see a deep and narrow field (appx. .75-.90 inches deep and less than 1.0" wide). Any ideas?
Open-source control projects, related links.  topic
Posted by Mario de Sousa on 23 October, 2000 - 1:25 pm
Basic synchronisation demo
I have made a copy of the basic demo but adding synchronisation between the modules.
PLCs and related questions. topic
Posted by Dwayne on 23 October, 2000 - 1:00 pm
In search Of Software
Need software to program modicon 110cpu31100 plc
Sensor technologies. topic
Posted by Adi Purnomo Sopamena on 23 October, 2000 - 12:26 pm
Natural Gas, Water & Air
Need to measure Air, Gas & Water particular for portable equipment
Information resources, documentation. topic
Posted by Jim Pinto on 23 October, 2000 - 11:23 am
Honeywell for Sale - GE Buys
I have predicted for at least a couple of years that Honeywell IAC would be sold - especially after Honeywell merged with Allied Signal in '99, and the new Honeywell was simply "milking" the old TDC installed base. Just last week, starting Sunday, 15 October 00, events precipitated the sale of all of Honeywell ...
PLCs and related questions. topic
Posted by Mike Martell on 23 October, 2000 - 10:55 am
DMC to Modsoft
Does anyone know how to tranfer Symbols and Comments from DMC LadderMaster to Modsoft?
Communications systems and equipment. topic
Posted by Jim Pinto on 23 October, 2000 - 10:29 am
How do I catch the Fieldbus?
My new article : "How do I catch the Fieldbus?" has just been published in the ISA Worldbus Journal, supplement to InTech, October 2000. You can read it on the web at :
http://www.jimpinto.com/writings/worldbus.html
Your comments and feedback will be appreciated. ...
PLCs and related questions. topic
Posted by Aragorn on 23 October, 2000 - 10:23 am
RS232 to RS485 Converter????
I need to convert RS232 to RS485, someone has any idea how is the cable??
Sorry for my english
Thanks
Open-source control projects, related links.  topic
Posted by Curt Wuollet on 23 October, 2000 - 9:14 am
Where are we?
Wanted to pose some questions to you all. It seems we have dropped to 0 development just
lately. I need to fix that. Where are we? ...
Open-source control projects, related links.  topic
Posted by jackh on 23 October, 2000 - 4:38 am
Java help for LPC?
I have had the LPC daemon up and running for over a week now without a single crash or lockup (http://claymore.engineer.gvsu.edu/lpcd). ...
PLCs and related questions. topic
Posted by Kevin Rutters on 23 October, 2000 - 4:21 am
BBC Plc
BBC PLC
Communications systems and equipment. topic
Posted by Suranga Manage on 23 October, 2000 - 12:58 am
MScomm and VC++ Sample Code needed
Sample code for use of MSComm with VC++
Engineering and workplace issues. topic
Posted by Jorge Torres on 22 October, 2000 - 10:57 am
Lost in the "bus war"
We are in an extensive modernization program in pulp and paper mill. We are receiving advice to leave our 4-20 instrumentation to go to the new bus technology. We are confused and donīt know which bus to go. Kindly request advice about selection criteria.
Application Questions and Problems topic
Posted by ramu on 21 October, 2000 - 10:41 pm
mask
interrupt mask
PLCs and related questions. topic
Posted by Raj Swaroop on 21 October, 2000 - 1:16 am
PID Control thro SCADA
This is about a PID Control using FIX32 SCADA Interfaced with SLC5/03 of ALLEN BRADLEY PLC.
Application Questions and Problems topic
Posted by ramu on 20 October, 2000 - 11:21 pm
AB PLC
event messaging
Computers in manufacturing; also hardware discussion. topic
Posted by Hullsiek, William on 20 October, 2000 - 3:59 pm
Industrial Computers with SCSI floppy drives
Does anybody have experience with www.winstation.com?
Communications systems and equipment. topic
Posted by Miroslav Simko on 20 October, 2000 - 2:55 pm
RS 232 scanner
I need to copy data on the RS 232 serial cable to the other serial line. Do anybody know to recommend me some hardware device. ( like redirector ...)
Application Questions and Problems topic
Posted by Hullsiek, William on 20 October, 2000 - 2:52 pm
iFIX For HVAC / Building Control
Can people offer any suggestions on HVAC / Building control solutions built on iFIX?
Human-Machine Interface and SCADA. topic
Posted by Petr Baum on 20 October, 2000 - 2:15 pm
Mitsubishi A0J2H
I need to provide MMI for Mitsubishi A0J2H but there seem to be no driver for it in our preferred platform - Labview. Any ideas?
Communications systems and equipment. topic
Posted by Martin Boers on 20 October, 2000 - 3:29 am
OPC Server for Trend BMS
OPC Server for interfacing to Trend BMS?
Application Questions and Problems topic
Posted by Bob on 19 October, 2000 - 7:55 pm
Blaine Of NBS Standard Cement 114N
Blaine Specific Surface of a NBS Standard Cement
Computers in manufacturing; also hardware discussion. topic
Posted by Randy DeMars on 19 October, 2000 - 3:11 pm
Industrial Computers
What brands of industrial computer have you had success with? ...
Engineering and workplace issues. topic
Posted by Pierre R. Hinse CET on 19 October, 2000 - 2:52 pm
Looking for 120Vac Slip Ring
Looking for a source of 120Vac slip ring.
Information resources, documentation. topic
Posted by SIDHPURKBPL on 19 October, 2000 - 2:46 pm
Source for ISA standard
Can somebody point me to a place where i can obtain ANSI/ISA Standard S5.1-1984, formerly ANSI Standard Y32.20-1975 "Instrumentation Symbols and Designations" and Standard S5.2.
Communications systems and equipment. topic
Posted by Peter Whalley on 19 October, 2000 - 2:39 pm
LONWorks interface to iFIX using OPC
I am involved in a project where the contractor is trying to interface iFIX to a LONWorks based building control system using Echelon's LNS and Innovex LON/OPC server. They are finding problems; does anyone have experience with this combination or has anyone successfully interfaced LONWorks/LNS to iFIX using another approach? ...
Application Questions and Problems topic
Posted by Silvano on 19 October, 2000 - 10:14 am
fiber-optic isolated measurements
fiber-optic isolated measurements
Communications systems and equipment. topic
Posted by Neset Ustundag on 19 October, 2000 - 9:57 am
Siemens GSM modem
I'm working on a remote accessing project. In this project Datas are taken by PIC16c77 and then transferred on Siemens GSM Modem. But I came across some problems on using gsm modem. ...
Engineering and workplace issues. topic
Posted by MORON, Olivier on 19 October, 2000 - 9:25 am
Which MetaModels in Automation ?
I would like to know which methodologies are used in the automation industry ? And why ?
SART ? SADT ? SDL ? StateChart ? UML ?
And where can I find infos for those ?
Software, including programming, OS issues, etc. topic
Posted by Shawn Korns on 19 October, 2000 - 6:51 am
Panelbuilder 1400e and Windows 2000
Getting Allen-Bradley Panelbuilder 1400e to work with Windows 2000.
Application Questions and Problems topic
Posted by ramu on 18 October, 2000 - 11:26 pm
fix32
history display in Fix 32
PLCs and related questions. topic
Posted by A. Ian on 18 October, 2000 - 10:35 pm
Micro PLC with built-in OI
I am looking for a micro PLC with a built-in display and keypad for setting setpoints and viewing registers. I am looking for direction and feedback on the product.
Software, including programming, OS issues, etc. topic
Posted by Juan De los Santos Naumov on 18 October, 2000 - 4:08 pm
RSnetworx for Control Net
We're trying to commission a 1747-SCNR module (Control net scanner for the SLC 500 PLC). We download the "eds" file from the AB web site and use it with the RSnetworx software in order to do the the module configuration. But when we try to edit the scan list of the module the following message shows up. ...
Information resources, documentation. topic
Posted by Jeffrey D. Brandt on 18 October, 2000 - 12:54 pm
Where does COST fit in, was COMM: Where does MPI fit in?
Where does COST fit in?
Communications systems and equipment. topic
Posted by Alastair Fordyce on 18 October, 2000 - 10:25 am
DeviceNet configuration
Has anyone had any experience of configuring the Cutler-Hammer Freedom series C395DNA intelligent overload using Rockwell RSNetworks for DeviceNet?
Sensor technologies. topic
Posted by Matthew da Silva on 18 October, 2000 - 10:10 am
Terminology Question
What do you call a meter for measuring the flow of air?
PLCs and related questions. topic
Posted by P. PRUVOST on 18 October, 2000 - 10:06 am
Modumat and Mediamat
I try to find information about Modumat 8000 and Mediamat S. Who is the manufacturer of this PLC?
The Business of Automation and Control topic
Posted by Jeffrey D. Brandt on 18 October, 2000 - 9:38 am
integration headaches
This term was recently used by a contributor to the list. As an employee of two different integrators for over 7 years, I'd like to respond, as to what causes these things. ...

Continuous process industries, DCS questions. topic
Posted by Roberto Tantalen on 18 October, 2000 - 9:27 am
Web-based Monitoring Process
I want to implement a remote monitoring, optimization and control programa by using internet. ...
Software, including programming, OS issues, etc. topic
Posted by john finn on 18 October, 2000 - 8:04 am
I/O Server Design
Does anybody know where i can get good information on how to design my own I/O server using InTouch and FactorySuite 2000.
Continuous process industries, DCS questions. topic
Posted by terry on 18 October, 2000 - 7:40 am
Pressure compensated drum level
Calculating the pressure compensation multiplication and bias.
Motion control, servos, steppers, etc. topic
Posted by Marian Stolarski on 17 October, 2000 - 3:28 pm
Winder algorithm
Does anyone have a generic winder control algorithm that commands the dc motor control to slow the speed of the shaft down
as the diameter of the winder increases?
PLCs and related questions. topic
Posted by Todd on 17 October, 2000 - 12:43 pm
Programming software for Idec Micro 1 PLC
Does anyone have the software to program the Idec Micro 1 PLC ?
Information resources, documentation. topic
Posted by Anthony Kerstens on 17 October, 2000 - 9:43 am
German Tech Terms
Does anyone know where (on the web if possible) I can find a glossary of German technical/software terms?

Your use of this site is subject to the terms and conditions set forth under Legal Notices and the Privacy Policy. Please read those terms and conditions carefully. Subject to the rights expressly reserved to others under Legal Notices, the content of this site and the compilation thereof is © 1999-2014 Nerds in Control, LLC. All rights reserved.

Users of this site are benefiting from open source technologies, including PHP, MySQL and Apache. Be happy. This page served by Yesod4.


Fortune
Gee, I feel kind of LIGHT in the head now, knowing I can't make my
satellite dish PAYMENTS!
Advertise here
Advertisement
our advertisers
Help keep our servers running...
Patronize our advertisers!
Visit our Post Archive